DAELIM A-FOUR - Скачать руководство пользователя | Manualshive

Страница: 6 / 67

background image

This manual describes matters pertaining to correct operation,
safe operation and simple maintenance of the vehicle you
purchased.
To ensure more comfortable and safer operation, make sure to
read this manual carefully prior to operation.

●

The photographs and drawings shown in this manual may
differ from those of actual vehicles due to changes in vehicle
specifications and modifications made.

●

This vehicle is designed for 2 riders including the operator.

●

Careful driving and the wearing of proper attire and safety
equipment are the most important factors in the safe operation
of the scooter. Please obey traffic regulations and do not be
hurried and careless.

●

Many new vehicle owners operate their newly purchased
vehicles with great care and attention to safety factors.
However, after becoming accustomed to the operations are
often discarded, which can lead to accidents. Please don't let
this happen to you and always approach the operation of your
vehicle with the safety considerations needed.
When operating the vehicle, always keep in mind and obey the
notes of precaution printed on the

“

Safety Precaution Label

”

attached to the vehicle.

4

OPERATION INSTRUCTION

SAFETY PRECAUTIONS

●

Do not use polluted gasoline.

Otherwse it cause rust inside the fuel tank, and close the
supply of fuel to the carburetor, leading to an improper
engine starting or may cause serious damage to engine.

●

Do use genuine oil then it to protect and extend vehicle
life.

●

As far as any defect caused by contaminated gasoline or
oil, no warranty shall be assured.

●

Be sure to wear helmet at all time.

●

Be sure to put on gloves at all time.

●

Observe the speed regulations.

●

Beware of muffler affer driving as it is still hot to be
burnt. Especially never children touch on it.

●

For safety, do not change, alteration or modification the
vehicle.

●

Regularly conduct specified maintenance inspections.
<Maintenance Inspection Points>
Brakes, Tires, Oil, Lights, Horn, Instruments

«
...
4
5
6
7
8
...
»

Содержание A-FOUR -




































































Отзывы:

Нет отзывов

Похожие инструкции для A-FOUR -

Бренд: E-Plus Страницы: 17

Бренд: Skoot-Eze Страницы: 12

Бренд: Lambretta Страницы: 33

Ninebot KickScooter ES1L

Бренд: Segway Страницы: 18

Бренд: Yamato Страницы: 31

Бренд: UFREE SCOOTER Страницы: 12

Бренд: Rebel Страницы: 32

Бренд: Clearwell Mobility Страницы: 16

Бренд: Single Speed Страницы: 14

Бренд: E-Wheels Страницы: 24

Бренд: E-TRENDS Страницы: 27

Бренд: Meyra-Ortopedia Страницы: 56

Бренд: hugo Страницы: 17

Бренд: Huffy Страницы: 20

Бренд: CareCo Страницы: 26

Бренд: PEUGEOT Страницы: 38

Бренд: Roma Medical Страницы: 20

Бренд: Robstep Страницы: 71

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды