DAELIM A-FOUR - страница 12 Скачать руководство пользователя

Страница: 12 / 67

<SPEEDOMETER>

Indicates driving speed. Maintain legal
speed limits to ensure safe operation.

<ODOMETER>

Indicates total distance in kilometers
travelled by the vehicle.

<FUEL WARNING INDICATOR>

When fuel in the fuel tank is low, the fuel
warning indicator turns on.
When this happens, fill the fuel tank with
the gasoline. When the fuel warning
indicator turns on, roughly 1.1 liters of
gasoline can be put in the vehicle to fill
tank.

<OIL WARNING INDICATOR>

When oil in the oil tank is low, the oil
warning indicator turns on.
When this happens, fill the oil tank with
pure oil.

<WINKER INDICATOR>

If the winker switch is operated,
the winker indicator flashes in union
with the flashing of the turn signals.

METER READING AND USAGE

METER

WARNING AND INDICATOR LAMP

INDICATOR LAMPS

SPEEDOMETER

WINKER

INDICATOR

ODOMETER

OIL WARNING
INDICATOR

FUEL WARNING
INDICATOR

●

If the oil warning indicator turns on
after the main switch is placed to an
“ON” position, quickly fill the oil
tank using pure oil

●

To avoid running out of fuel which
might cause severe injury due to a
engine abruptly stop.

Содержание A-FOUR -




































































Результаты поиска

Содержание A-FOUR -

Отзывы:

Похожие инструкции для A-FOUR -

Бренды по названию

Популярные бренды

DAELIM A-FOUR -, Брошюра

Результаты поиска

Содержание A-FOUR -

Отзывы:

Похожие инструкции для A-FOUR -

Бренды по названию

Популярные бренды