manualshive.com logo in svg

DAELIM A-FOUR -, Брошюра

Поделиться
Скачать
DAELIM A-FOUR - Скачать руководство пользователя страница 54

52

Prior to starting always look around to avoid accident.

①

Get on the vehicle after pulling back the stand. 

②

Keep hold brake lever when starting.

③

Start using the cell (Erect main stand when using the kick
starter)

④

Start driving slowly  after turning on  the winker and  
releasing  the brake while  ensuring the safety around the 
vehicle.

STARTING

●

Return the  side stand  to its  original position. Keep driving
without doing this  may cause  turnover accident.

●

Drive the vehicle only on the driveway. Driving on the
walkway can cause accident. Also, if the wheel is transformed
when advancing directly to the walkway, the vehicle can be
overturned resulting in injury of the driver due to the driving
unstability.

●

Overspeed driving on the unpaved road can cause the vehicle to
be overturned resulting in injury of the driver due to the driving
unstability.

●

Do not drive in the gravel road. If any gravel enters the wheel or
engine case, the vehicle can be overturned resulting in injury of
the driver.

●

If possible, do not drive close to the sea or on the road where
calcium chloride is treated.
The muffler, external parts and welded parts can be corroded
rapidly, and also in case of damage of the frame, the vehicle can
be overturned resulting in injury of the driver.

Содержание A-FOUR -




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды