Offset Open Option:
This setting determines if the Open Position Offset is ON or OFF.
On boot up, the system HOMES to the home switch and ‘zeroes’ out the system. If
for any reason after installing the system you would prefer to OPEN the door to a
position more ‘inward’ than the extreme HOME switch position, the OFFSET OPEN is
a software option to position the door. If the Offset Open Option is turned off, then
the door will move to the OPEN position set by the HOME switch. If the Offset Open
Option is turned ON, then the door will move open to the position determined by
the Set Open Offset value.
Set Open Offset:
This setting determines the offset distance away from the HOME switch that the
door will stop at when in the fully opened position after the initial boot up process
is complete. On boot up, the system HOMES to the home switch and zeroes out
the system. If the Open Offset is turned on, the offset value is used for the fully
open position.
The value in the menu is approximately 1” = 500. So for example, to create a 1/2”
offset, put the offset value at 250. The door should move as the setting is changed
in the menu as long as the Offset Open Option is turned on, this way you can see
the door position updates real time in 1/8” increments.
AutoClose Option:
If this option is ON, the door will automatically CLOSE after a delay amount set by
the AUTO CLOSE DELAY menu option.
AutoCloseDelay:
This sets the time in seconds after which the door will automatically CLOSE if the
AUTO- CLOSE option is ON. For example, if the setting is 5, then after the door
opens, in 5 seconds it will close again.
Reset Defaults:
If for any reason the factory settings need to be reinstalled, this menu option will
restore the settings that are installed prior to shipping the system. This option will
clear any settings that have been set by the user. If you have a need to reset the
defaults, you may want to go through all the menu options and write down your
custom settings for future reference.
14
