12
Accel/Decel Parameters:
There is a lot of flexibility for affecting the motion profile. One of the nice
features of the Dado Door system is the ability to create an elegant motion
to suit the desired aesthetic and function. The Acceleration and
Deceleration for both opening and closing directions are able to be set in
this menu separately. Toggle through each setting with ENTER button.
The menu has 4 values: AC DC AO DO
AC = Acceleration when Closing
DC = Deceleration when Closing
AO = Acceleration when Opening
DO = Deceleration when Opening
A smaller number means the accel/decel %factor will be smaller. A larger
number means the factor will be larger, and will take longer to slow the
door to a stop. To cause the door to take longer to accelerate to full
speed, choose a higher accel factor. Shorter values produce a more
abrupt motion at the far ends of travel. Larger values produce a more
graceful, slower accel or decel. The value for each parameter is an actual
percentage of distance of the total motion.
Final Note Regarding The Object Detection Level: If the Max Torque is not
sufficient to move the door to the final stopping point, the door may not
actually be obstructed but this error may still occur. If it is certain that there is
no obstruction, but this error appears, try raising the Max Torque by 500 and
retest. Remember, the door must close 10 times without an obstruction
before the Object Detection begins to operate.
