11
Use and Care Manual
Operating Instructions
Things to Know Before You Start
For best results, the filter holder (drink dispensing assembly) must
be hot. Keep it attached to the dispensing collar when the coffee
system is heating up.
A small amount of dripping from the drink dispenser is normal after
drinks are dispensed.
This coffee system is designed to make one or two hot drink(s) at a
time.
For proper operation, clean your coffee system regularly according to
the cleaning schedule on page 22.
The coffee system purges water into the drip tray to ensure that the
water used for drink making is hot. Empty out the drip tray when it
starts to get full.
¾
¾
¾
¾
¾
Add Your Own Flair!
With your coffee system you can experiment to come up with all
sorts of coffee drinks that suit your personal preference
!
WARNING
To prevent personal injury, keep your hands out of the coffee
bean container.
Some of the metal surfaces behind the front panel are
hot when the power switch is on. Avoid contact with these
surfaces.
Do not pour flavored, un-roasted, partial coffee beans or
ground coffee into the coffee bean container. Doing so may
cause the coffee grinding mechanism to jam. Use flavored
coffee creamers or syrups after making the coffee to flavor it.
You may also make flavored coffee using ground coffee pods
placed inside the dispenser filter instead of ground coffee.
To avoid steam coming out of the unit unexpectedly, rotate
the steam nozzle knob fully counter-clockwise before turning
on the power switch.
•
•
•
•
IMPORTANT
Drink volume and strength will vary due to coffee
type, coffee fineness, grind time, amount of
tamping and the drink volume setting. You may
need to experiment for best results. To adjust the
coffee fineness (grinder adjustment) see page 30.
To adjust the grind time see page 31.
