14
Semi-Automatic Coffee System
Operating Instructions
To insert the filter holder into the dispenser collar: Insert the
top of the round end of the filter holder into the dispenser collar
with the handle pointed to the left. Turn the handle to the right
to lock it in place. The handle should point straight out when
locked in place.
To remove the filters, use the tool provided. Insert it
between the filter holder and the filter and pry the filter
loose.
3.
Assembling and Using the Drink Dispenser
Screw either the single or double dispenser nozzle into the
bottom of the filter holder. The double nozzle is for making two
cups of coffee at the same time. When making two cups at the
same time, put the cups side by side, one on each side of the
nozzle. Or to save time changing nozzles you may center one
cup under the double nozzle.
Insert the single filter into the top of the filter holder for one
cup of coffee or a shot of Espresso. Insert the large filter for two
shots of espresso, two cups of coffee or for a large travel mug.
When inserting a filter into the dispenser, push down firmly on
both sides until it snaps into place.
1.
2.
WARNING
When the filter holder is attached to
the coffee system it will become hot
when the power switch is on.
Preparing to Operate Your Coffee System (continued)
Inserting the Filter Holder
Filter
Filter Holder
Dispenser Nozzle
Making Two Cups
Using the Double
Nozzle for One Cup
