dabotek DT1200i, Руководство по эксплуатации

Страница: 10 / 37

10
1.8 PROTECT YOURSELF AND OTHERS!
Some welding, cutting, and gouging processes are noisy and require ear protection. The arc, like
the sun, emits ultraviolet (UV) and other radiation and may injure skin and eyes. Hot metal can
cause burns. Training in the proper use of welding processes and equipment is essential to
prevent accidents.
1. Always wear safety glasses with side shields in any work area. In conjunction with eye
protection, welding helmets or face shields are also required.
2. Use a face shield fitted with the correct filter cover plates to protect your eyes, face, neck,
and ears from sparks and rays of the arc when operating or observing operations. Warn
bystanders not to watch the arc and not to expose themselves to the rays of the electric
arc or hot metal.
3. Wear flameproof type gloves, heavy long-sleeve shirt, cuff less trousers, and a welding
helmet or cap for hair protection, to protect against arc rays and hot sparks or hot metal.
A flameproof apron may also be desirable as protection against radiated heat and
sparks.
4. Hot sparks or metal can lodge in rolled up sleeves, trouser cuffs, or pockets. Sleeves and
collars should be kept buttoned, and open pockets eliminated from the front of clothing.
2. PRODUCT DESCRIPTION AND INFORMATION
2.1 INTRODUCTION TO THE DT1200I
The DT1200i machines are portable drawn arc Stud welders using an inverter-type power supply
to generate the output power. Both machines are currently available in the following models:
400V single voltage for European industry, 480V single voltage operating in three-phases; 575V
single voltage operating in three-phases.