dabotek BS310, Руководство пользователя

Страница: 16 / 33

B
S3x
x-
-engl
--220199
Operating manual for welding unit
Type: BS304 / BD306 / BS308 / BS310
BSS
BS3xx
Page 16
22.01.99
Connecting to the mains supply
Make sure the supply voltage is correct: 110V--240V
50--100Hz. The equipment automatically adjusts to
your voltage setting. Insert the plug into the mains
socket.
Connecting the welding head
Insert the 12--pole plug into the equipment socket.
There can be no mistake about the plug contacts
because the plug is protected against twisting. To
secure the plug--and--socket connection turn the
plug bushing clockwise until it stops.
Insert the welding cable plug of the gun into the wel-
ding socket.
To secure the plug--and--socket connection firmly
turn the plug clockwise until it stops.
Remark: Loose welding current connection will scorch the plug-and-socket connection. If this hap-
pens constant welding results are no longer ensured!
Connecting the ground cables
Insert the plugs of the ground cables into the
ground sockets.
To secure the plug--and--socket connection firmly
turn clockwise until it stops.
Connect the ground terminals or ground jacks to the
workpiece.
Make sure that the welding cables are laid out long.
Mains plug
Mains socket
12--pole plug
Equipment socket
Welding receptacle
Welding plug
Ground socket
Ground jack
Ground plug