dabotek BS310, Руководство пользователя

Страница: 13 / 33

B
S3x
x-
-engl
--220199
Operating manual for welding unit
Type: BS304 / BS306 / BS308 / BS310
BSS
BS3xx
Page 13
22.01.99
Operating modes
You can operate the set in two different ways.
* Inout of the charging voltage ”QUICK MENU”
* Input of the stud diameter ”MAIN MENU”
Quick menu
If you quickly want to carrry out a charge in the capacitor voltage, proceed as follows:
Action Switch Display
Switch the welding set on.
The display shows the last se-
lected charging voltage,
e.g. 100V.
Briefly hit the ”MODE” key
(less than 2sec.)
The CURSOR starts to blink.
MODE
cursor blinks
Place the CURSOR with the
“RIGHT ARROW” or “LEFT AR-
ROW” key in the appropriate
units:
“ONES”, “TENS” or “HUN-
DREDS” position.
left right
hundreds
tens
ones
Set the new value at the prese-
lected position with the “UP
ARROW” or “DOWN ARROW”
key.
Example: change from 100V to
150V.
up
down
Have you set the value?
Now confirm with the ”ENTER”
key.
When a “BEEP” is sounded, the
welding set has accepted the
new value.
ENTER
beep
The welding capacitors are
charged or discharged to the
selected value.
or
The display shows the newly
set value.
The welding unit is now ready
for operation.