dabotek BS310, Руководство пользователя

Страница: 17 / 33

B
S3x
x-
-engl
--220199
Operating manual for welding unit
Type: BS304 / BS306 / BS308 / BS310
BSS
BS3xx
Page 17
22.01.99
Startup
S
Has the set been correctly connected?
S
Has the welding gun been correctly connected?
S
Have the ground cabels been correctly connected?
Procedure Function element Display
Schwitch on the welding set.
The Capacitors are automatically charged to the
last selected voltage value. During th process
the charging symbol appears in the display. Af-
ter the charging the display shows the voltage,
e.g. 100V.
Now select your required parameters.
a.Entering the charging voltage
see “Quick menu”.
b.Entering the stud diameter
see “Main menu”.
MODE
MODE
2sec.
cursor blinks
To start welding, place the welding gun verti-
cally on the workpiece. Firmly push the welding
gun down. The three support feet or the support
tube must lean fully on the workpiece. Trigger
the welding gun steadily and without shaking.
The equipment starts welding. Welding can only
be started when the contact symbol appears in
the display.
or
Check your welding for strength.
If the strength is inadequate verify the equip-
ment settings and make sure that the base ma-
terial and the welding stud are suitable for wel-
ding.
Refer to the appropriate operating manual for
information on how to set and handle the wel-
ding gun (welding head).