Dabi Atlante EAGLE 3D, Руководство пользователя

Страница: 86 / 102

85
15.5. DISPOSAL OF THE UNIT
In order to prevent environmental contamination or improper disposal of
the Eagle 3D CT Scanner, the equipment must be disposed of (according to
local, state, or federal regulations) at an appropriate site.
The equipment contains materials and solutions listed below which, upon
completion of its useful life, must be disposed of at the appropriate sites.
In particular, the equipment contains the following materials and/or
components:

Tubehead: non-conductive oil, lead, copper, iron, aluminum, glass,
tungsten.

Control panel and shooter: iron, copper, aluminum, glass resin, non-
biodegradable plastic material.

Column, rotating arm and extensions: iron, lead, aluminum, copper, glass
resin and non-degradable plastic material.
The manufacturer and/or its distributors are not responsible for
improper disposal by the buyer.
15.6. WARRANTY
The Warranty Certificate should be completed by the Authorized Technical
Alliage and one copy must be left with owner to prove the equipment warranty.
The remaining copies will be send to the Distributor and to the factory.
The warranty is limited to repair or replacement of parts with manufacturing
defects, not including the repair of defects originating in:
- Failure to observe the operating and maintenance instructions;
- Falls or knocks;
- Improper storage;
- Action of nature agents;
- Installation and service performed by persons not authorized by Alliage;
- Damage to the painted parts and plastic painted or not, caused by misuse;
The warranty period is 1 (one) years from the date of installation,
provided that the equipment has not been stored for more than 1 (one) years
from the date of issue of the invoice customer billing, first owner, until the date
of installation.