Dabi Atlante EAGLE 3D, Руководство пользователя

Страница: 11 / 102

10

The equipment has been designed to withstand continual and
intermittent operation; therefore, follow the cycles described in
these operation instructions.

Since radiation exposure can cause damage to human cells, it is
recommended that no one should remain in the radiographic
examination room, unless the patient requires restraint. In this
case, such individual must be properly protected against X-Ray
emission.

Although this equipment has been designed according to
electromagnetic compatibility standards, it may, under very
extreme conditions, interfere with other equipment. Do not use it
with other devices that are sensitive to interference or with devices
that create high electromagnetic disturbances.

NOT RECOMMENDED THE USE OF X-RAY EQUIPMENT FOR
PREGNANT WOMEN.
THE MANUFACTURER SHALL NOT BE LIABLE IN CASE:

THE X-RAY MACHINE IS USED FOR PURPOSES OTHER
THAN THOSE FOR WHICH IT HAS BEEN DESIGNED.

DAMAGE CAUSED TO THE EQUIPMENT, THE OPERATOR
AND/OR PATIENT AS A RESULT OF IMPROPER
INSTALLATION AND MAINTENANCE PROCEDURES IN
DISAGREEMENT WITH THE OPERATION INSTRUCTIONS
ACCOMPANYING THE EQUIPMENT.
IMPROPER EQUIPMENT OPERATION..
3.6.3. WARNING AND/OR CAUTION AFTER EQUIPMENT USE/OPERATION

Turn off the x-ray machine's master switch when it is not used for
long periods of time.

Always keep the equipment clean for its next operation.

If the equipment is defective, do not try to fix it yourself, instead call
for authorized technical assistance.

Do not replace any equipment parts. Do not disconnect the cable
or other connections unnecessarily.

The Eagle 3D CT Scanner must be off when other equipment such
as an electric scalpel or other similar devices are being used.

After using the equipment, clean and disinfect all parts that may
have been in contact with the patient.