Dabi Atlante EAGLE 3D, Руководство пользователя

Страница: 10 / 102

9
3.5. ADDITIONAL PROCEDURES PRIOR TO EQUIPMENT USE
Even prior to its first use, the equipment must be cleaned and
disinfected; the same additional procedures must be followed for reuse, as
described in Chapter
0
.
3.6. WARNINGS AND/OR CAUTION TO BE ADOPTED
3.6.1. WARNINGS AND/OR CAUTION DURING EQUIPMENT
INSTALLATION

The equipment must be installed only by service technicians authorized
by the manufacturer.

Place the equipment on a site where it will not be in contact with
moisture or water.

Install the unit on a site where it will not be damaged by pressure,
temperature, moisture, direct sunlight, dust or salts.

The equipment must not be submitted to inclination, excessive vibration
or shock (including during transportation and handling).

This equipment has not been designed for use in facilities where
vapors, flammable anesthetic mixtures in contact with air, oxygen or
nitrous oxide can be detected.

Check the equipment’s voltage when performing electric installation.
Failure to do so may damage the equipment.

The equipment must be properly grounded. Failure to do so may
result in “Safety Hazard”.

Depending on local regulation the X-Ray emission control may require
installation outside the facility where the equipment is placed, and the
operator may need visual contact with the patient through a window
with radiological glass or similar, since the operator must not lose visual
contact with the patient.

Mobile and portable RF communication equipment can affect the Eagle
3D CT Scanner.

This equipment must be solely used by health care professionals as it
may cause radio interference or interrupt the operation of nearby
equipment. Mitigatory measures, such as equipment re-orientation or
replacement and the facility’s screening, may be necessary.
3.6.2. WARNING AND/OR CAUTION DURING EQUIPMENT USE

The equipment must be operated only by qualified and trained
professionals (dentists, radiology technicians, hygienists or
engineers).

Always observe the display messages, the equipment as a whole
and the patient in order to detect any arising problems early.

In case occasional maintenance is required, use only services
provided by Authorized Service Technicians.