ENGLISH
38
tE:
Display of the temperature of the power stages (°C)
49
bt:
Display of the temperature of the electronic card (°C)
49
GS:
Display of running status
49
FF:
Display of fault history (+ and - to scroll through the alarms)
49
10.
ACCESS TO MANUAL MODE OF THE MACHINE
(SET and + and - keys for 5 seconds)
50
10.1
rt:
setting the direction of rotation
50
10.2
Starting the electropump
50
11.
GENERAL SYSTEM RESET (MODE and SET and + and – keys)
50
12.
RESTORING THE FACTORY SETTINGS (SET and + keys)
50
13.
ERROR AND STATUS CONDITIONS
50
13.1
bL:
Blockage due to water lack
51
13.2
bP:
Blockage due to fault of the pressure sensor
51
13.3
LP:
Blockage due to low supply voltage (excluding A.D. M/M 1.1 and A.D. M/T 1.0)
51
13.4
oF/ot :
Blockage due to current overload in the output stages with temperature of the stages
higher than 45°C
52
13.5
SC:
Blockage due to direct short circuit between the phases of the output terminal
52
13.6
Manual reset of error conditions
52
13.7
Self-reset of error conditions
52
14.
INDICATIONS ON THE DISPLAY
53
INDEX
OF
TABLES
Page
Table 4.
Technical data and limitations of use
40
Table 8.1.
Characteristics and interpretations
41
Table 8.2.
Operation: keyboard factory settings
44
Table 8.6.12
Table summarising the configuration of digital inputs IN1, IN2, IN3
48
Table 8.6.14
Assigning the parameters that associate functions with the digital outputs OUT1, OUT2
49
Table 10.
Access to manual mode of the machine: Use of the keys
50
Table 13.
Error and status conditions: Warnings in the fault log
51
Error and status conditions: Error conditions
51
Table 13.7.
Automatic resets of error conditions
52
Table 14.
Indications on the display
53
INDEX
OF
FIGURES
page
Fig. 1
Logic-functional diagram of the connections of the alarm output terminals
42
Fig. 2
Connection diagram for 2 ACTIVE DRIVERS for exchange function
42
Fig. 3
Logic-functional diagram of the connections of the user input terminals
43
