D16 Group Toraverb 1.2.0, Руководство пользователя

Страница: 5 / 20

Chapter 2. Signal flow 2.1. Basic modules
Attenuation - This parameter changes the characteristic of the wall’s surface, its dump-
ing properties.
Bass cut - It’s another parameter, that controls other property of reflecting surface;
what frequencies below the set one are absorbed by the surface. We can choose
frequency from the range: [0
H z . . .
22
kH z
]
Decay time - It shows the current decay time of the whole reverberation path. Following
parameters have influence on decay time:
•
Early reflections: Size ,
•
Early reflections: Diffusion ,
•
Late reflections: Size ,
•
Late reflections: Diffusion ,
•
Late reflections: Feedback
Attenuation parameters for early and late reflections have also effect on Decay
time , but it’s not taken into account for calculations.
Late EQ - Single peak parametric EQ for late reflections’ output:
Figure 2.4: Late reflections - Parametric EQ
It’s controlled within following parameters:
Frq - Centre frequency of a peak.
Gain - Gain value for a band [
−
24
dB . . .
24
dB
].
Bw - Width of the band [4
octaves . . .
0
.
5
octave
].
Master section - There’re global reverberation parameters
4