D16 Group Toraverb 1.2.0, Руководство пользователя

Страница: 4 / 20

Chapter 2. Signal flow 2.1. Basic modules
Early EQ - Single peak parametric EQ for early reflections’ output:
Figure 2.2: Early reflections - Parametric EQ
It’s controlled within following parameters:
Frq - Centre frequency of a peak.
Gain - Gain value for a band [
−
24
dB . . .
24
dB
].
Bw - Width of the band [4
octaves . . .
0
.
5
octave
].
Late reflections - Parameters controlling the late reflections of reverb.
Figure 2.3: Late reflections
Size - Size of the room for late reflections only.
Diffusion - It’s the reflecting surface’s ability to spread the echo out. If this parameter
is set to Sharp , reflecting surface is perfectly flat and doesn’t distort reflected wave.
In a case of setting this value to
Smooth
, reflecting surface distorts wave and spread
out into different directions.
Feedback - Controls how much of wave energy is consumed every reflection. The less
value the more energy consumes every reflection, that means the feedback is weaker
then.
3