D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 93

Страница: 93 / 287

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

Figure 7- 7. Find/Edit VLAN tab of the 802.1Q VLAN window

NOTE:

The Switch supports up to 4k static VLAN entries.

The following fields can then be set in the

Add/Edit VLAN

tab:

Parameter Description

VID (VLAN ID)

Allows the entry of a VLAN ID or displays the VLAN ID of an existing VLAN in the

Add/Edit

VLAN

tab. VLANs can be identified by either the VID or the VLAN name.

VLAN Name

Allows the entry of a name for the new VLAN or for editing the VLAN name in the

Add/Edit

VLAN

tab.

Advertisement

Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.

Port

Shows all ports of the Switch for the configuation option.

Tagged

Specifies the port as 802.1Q tagging. Clicking the radio button will designate the port as tagged.

Untagged

Specifies the port as 802.1Q untagged. Clicking the radio button will designate the port as
untagged.

Forbidden

Click the radio button to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.

Not Member

Click the radio button to allow an individual port to be specified as a non-VLAN member.

Click

Apply

to implement changes made.

Содержание xStack DGS-3200 Series
































































































































































































































































































Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы:

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 93 / 287

Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы: