D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 192 / 287

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
178
Figure 10- 42. CPU Access Rule Detail Information window for Packet Content
Time Range Settings
The Time Range window is used in conjunction with the Access Profile feature to determine a starting point and an ending point,
based on days of the week, when an Access Profile configuration will be enabled on the Switch. Once configured here, the time
range settings are to be applied to an access profile rule using the Access Profile
table. The user may enter up to 64 time range
entries on the Switch.
To open this window, click ACL > Time Range Settings :
Figure 10- 43. Time Range Settings window
The user may adjust the following parameters to configure a time range on the Switch:
Parameter Description
Range Name Enter a name of no more than 32 alphanumeric characters that will be used to identify this time
range on the Switch. This range name will be used in the Access Profile
table to identify the
access profile and associated rule to be enabled during this time range.
Hours This parameter is used to set the time in the day that this time range is to be enabled using the
following parameters:
•
Start Time - Use this parameter to identify the starting time of the time range, in hours,
minutes and seconds, based on the 24-hour time system.
•
End Time - Use this parameter to identify the ending time of the time range, in hours,
minutes and seconds, based on the 24-hour time system.
Weekdays Use the check boxes to select the corresponding days of the week that this time range is to be
enabled. Tick the Select All Days check box to configure this time range for every day of the week.
Click Apply to implement changes made. Currently configured entries will be displayed in the Time Range Information table in
the bottom half of the window shown above.