manualshive.com logo in svg

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 131 / 287

Поделиться
Скачать
D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 131

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

117 

     

IP-MAC Binding Settings 

The window shown below can be used to create IP-MAC binding entries. Enter the IP and MAC addresses of the authorized users 
in the appropriate fields and click 

Apply

. To modify either the IP address or the MAC address of the binding entry, make the 

desired changes in the appropriate field and click the corresponding 

Edit 

button. To find an IP-MAC binding entry, enter the IP 

and MAC addresses and click 

Find

. To delete an entry, click the corresponding 

Delete 

button. To clear all the entries from the 

table, click 

Clear All

. 

In addition, the top of this window features an ACL Mode for IP-MAC Binding that is designed to alleviate some issues that have 
arisen when ACL and IP-MAC Binding are used simultaneously. When the ACL Mode is 

Enabled 

in this window, the Switch will 

create two entries in the Access Profile Table. The entries may only be created if there are at least two Access Profile IDs 
available on the Switch. If not, when the ACL Mode is 

Enabled

, an error message will be prompted to the user. When the ACL 

Mode is 

Enabled

, the Switch will only accept IP packets from an entry created in this 

IP-MAC Binding Settings

 window. All 

others will be discarded 

 Click 

Security

 > 

IP-MAC Port

 

Binding

 > 

IP-MAC Binding

 

Settings

 to view the 

IP-MAC Binding Setting

 window: 

 

Figure 9- 5. IP-MAC Binding Settings window 

The following fields can be set or modified: 

Parameter                    Description 

ACL Mode 

This field will enable and disable the ACL mode for IP-MAC binding on the Switch, without 
altering previously set configurations. When 

Enabled

, the Switch will automatically create two 

ACL packet content mask entries, which will aid the user in processing certain IP-MAC binding 
entries created. The ACL entries created when this is enabled can only be automatically 
installed if the Access Profile table has two entries available of the possible six entries allowed. 

Trap Log 

This field will enable and disable the sending of trap log messages for IP-MAC binding. When 

Enabled

, the Switch will send a trap log message to the SNMP agent and the Switch log when 

an ARP packet is received that doesn’t match the IP-MAC binding configuration set on the 
Switch. 

IP Address 

Enter the IP address to bind to the MAC address set below. 

MAC Address 

Enter the MAC address to bind to the IP Address set above. 

Mode 

The user may set the IP-MAC Binding Mode here by using the pull-down menu. The choices 
are: 

ARP

 – Choosing this selection will set a normal IP-MAC Binding entry for the IP address and 

MAC address entered. 

ACL

 – Choosing this entry will allow only packets from the source IP-MAC binding entry 

created here. All other packets with a different IP address will be discarded by the Switch. This 
mode can only be used if the ACL Mode has been 

Enabled

 at the top of the window.  

Ports 

Specify the switch ports for which to configure this IP-MAC binding entry (IP A MAC 
Address). Tick the All Ports check box to configure this entry for all ports on the Switch. 

Содержание xStack DGS-3200 Series
































































































































































































































































































Отзывы:

Нет отзывов