D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 84

Страница: 84 / 287

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

•

Expand

- To expand the SIM group, in detail.

•

Add to group

- Add a candidate to a group. Clicking this option will reveal the following dialog box for the user to enter a

password for authentication from the Candidate Switch before being added to the SIM group. Click

to enter the

password or

Cancel

to exit the dialog box.

Figure 6- 57. Input password dialog box

•

Property

- To pop up a window to display the device information.

Menu Bar

The

Single IP Management

window contains a menu bar for device configurations, as seen below.

Figure 6- 58. Menu Bar of the Topology View

The five menus on the menu bar are as follows.

File

•

Print Setup

- Will view the image to be printed.

•

Print Topology

- Will print the topology map.

•

Preference

- Will set display properties, such as polling interval, and the views to open at SIM startup.

Group

•

Add to group

- Add a candidate to a group. Clicking this option will reveal the following dialog box for the user to enter a

password for authentication from the Candidate Switch before being added to the SIM group. Click

to enter the

password or

Cancel

to exit the dialog box.

Figure 6- 59. Input password dialog box

•

Remove from Group

- Remove an MS from the group.

Device

•

Configure

- Will open the web manager for the specific device.

View

•

Refresh

- Update the views with the latest status.

•

Topology

- Display the Topology view.

Help

•

About

- Will display the SIM information, including the current SIM version.

Содержание xStack DGS-3200 Series
































































































































































































































































































Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы:

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 84 / 287

Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы: