D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 119

Страница: 119 / 287

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

105

using GMRP. The options are:

None

- No restrictions on the port dynamically joining the multicast group. When

None

chosen, the port will not be a member of the Static Multicast Group.

Egress

- The port is a static member of the multicast group.

Click

Apply

to implement the changes made. To delete an entry in the Static Multicast Forwarding Table, click the corresponding

Delete

button.

Multicast Filtering Mode

Open the

L2 Features

folder, go to

Forwarding & Filtering

, and click on the

Multicast Filtering Mode

link to see the window

below:

Figure 7- 35. Multicast Filtering Mode window

Parameter Description

VLAN Name

The VLAN to which the specified filtering action applies. Select the All

option to apply the action to

all VLANs on the Switch.

Filtering Mode

This drop-down menu allows you to select the action the Switch will take when it receives a
multicast packet that requires forwarding to a port in the specified VLAN.

•

Forward Unregistered Groups

– This will instruct the Switch to forward a multicast packet

whose destination is an unregistered multicast group residing within the range of ports
specified above.

•

Filter Unregistered Groups

– This will instruct the Switch to filter any multicast packets

whose destination is an unregistered multicast group residing within the range of ports
specified above.

Click

Apply

to implement changes made.

Содержание xStack DGS-3200 Series
































































































































































































































































































Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы:

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 119 / 287

Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы: