manualshive.com logo in svg

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 61 / 287

Поделиться
Скачать
D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 61

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

47 

     

Console Serial Port (RS-232). 
T - If the IP address has this letter attached to it, it denotes a firmware upgrade through Telnet. 
S - If the IP address has this letter attached to it, it denotes a firmware upgrade through the 
Simple Network Management Protocol (SNMP). 
W - If the IP address has this letter attached to it, it denotes a firmware upgrade through the web-
based management interface. 
SSH – If the IP address has this letter attached to it, it denotes a firmware upgrade through the 
Secure Shell (SSH). 
SIM – If the IP address has this letter attached to it, it denotes a firmware upgrade through the 
Single IP Management feature. 

User 

States the user who downloaded the firmware. This field may read “Anonymous” or “Unknown” 
for users that are not identified. 

 

Содержание xStack DGS-3200 Series
































































































































































































































































































Отзывы:

Нет отзывов