D-Link xStack DES-3800 Series, Руководство пользователя

Страница: 242 / 360

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Accounting
The Accounting feature of the Switch uses a remote RADIUS server to collect information regarding events occurring on the
Switch. The following is a list of information that will be sent to the RADIUS server when an event triggers the Switch to send
these informational packets.
•
Account Session ID
•
Account Status Type
•
Account Terminate Cause
•
Account Authentic
•
Account Delay Time
•
Account Session Time
•
Username
•
Service Type
•
NAS IP Address
•
NAS Identifier
•
Calling Station ID
There are two types of Accounting that can be enabled on the Switch.
Exec – When enabled, the Switch will send informational packets to a remote RADIUS server when a user either logs in, logs out
or times out on the Switch, using the console, Telnet or SSH.
System - When enabled, the Switch will send informational packets to a remote RADIUS server when system events occur on the
Switch, such as a system reset or system boot.
Remember, this feature will not work properly unless a RADIUS Server has first been configured. This RADIUS server will
format, store and manage the information collected here. To configure the Accounting types on the switch, click
Security >
Access Authentication Control > Accounting , which will display the following window. Use the pull-down menu to enable or
disable Exec accounting, System Accounting or both. Click Apply to implement changes made.
Figure 11- 3 . Accounting Type State window 8
227