D-Link xStack DES-3800 Series, Руководство пользователя

Страница: 173 / 360

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 8- 59. DVMRP Interface Settings - Edit window
The following fields can be set:
Parameter Description
Interface Name Displays the name of the IP interface for which DVMRP is to be configured. This must be a
previously defined IP interface.
IP Address Displays the IP address corresponding to the IP Interface name entered above.
Neighbor Timeout
Interval (1-65535) This field allows an entry between 1 and 65,535 seconds and defines the time period DVMRP
will hold Neighbor Router reports before issuing poison route messages. The default is 35
seconds .
Probe Interval (1-
65535) This field allows an entry between 1 and 65,535 seconds and defines the interval between
‘probes’. The default is 10 .
Metric (1-31)
This field allows an entry between 1 and 31 and defines the route cost for the IP interface.
The DVMRP route cost is a relative number that represents the real cost of using this route in
the construction of a multicast delivery tree. It is similar to, but not defined as, the hop count
in RIP. The default cost is
1 .
State This field can be toggled between Enabled and Disabled and enables or disables DVMRP for
the IP interface. The default is Disabled .
Click Apply to implement changes made. Click Show All DVMRP Interface Entries to return to the DVMRP Interface Settings
window.
158