manualshive.com logo in svg

D-Link xStack DES-3800 Series, Руководство пользователя, Страница: 198 / 360

Поделиться
Скачать
D-Link xStack DES-3800 Series Скачать руководство пользователя страница 198

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch 

 

Figure 10- 9. Access Rule Configuration window (IP) 

Configure the following 

Access Rule Configuration 

settings for IP: 

Parameter                    Description 

Profile ID 

This is the identifier number for this profile set. 

Mode 

Select 

Permit

 to specify that the packets that match the access profile are forwarded by the 

Switch, according to any additional rule added (see below). 

Select 

Deny

 to specify that packets that match the access profile are not forwarded by the 

Switch and will be filtered. 

Select 

Mirror

 to specify that packets that match the access profile are mirrored to a port 

defined in the Port Mirroring window. Port Mirroring must be enabled and a target port must be 
set. Remember, Port Mirroring cannot cross-box, that is they cannot span across switches in a 
switch stack. 

Access ID 

Type in a unique identifier number for this access. This value can be set from 1 - 65535. 

• 

Auto Assign

 – Checking this field will instruct the Switch to automatically assign an 

Access ID for the rule being created. 

Type 

Selected profile based on 

Ethernet

 (MAC Address), 

IP

 address, or 

Packet Content Mask

.  

• 
• 
• 

Ethernet

 instructs the Switch to examine the layer 2 part of each packet header.   

IP 

instructs the Switch to examine the IP address in each frame's header.  

Packet Content Mask

 instructs the Switch to examine the packet header.

 

Priority (0-7) 

This parameter is specified if you want to re-write the 802.1p default priority previously set in 
the Switch, which is used to determine the CoS queue to which packets are forwarded to. 
Once this field is specified, packets accepted by the Switch that match this priority are 
forwarded to the CoS queue specified previously by the user. 

Replace priority with 

−

 Click the corresponding box if you want to re-write the 802.1p default 

priority of a packet to the value entered in the 

Priority 

field, which meets the criteria specified 

previously in this command, before forwarding it on to the specified CoS queue. Otherwise, a 
packet will have its incoming 802.1p user priority re-written to its original value before being 
forwarded by the Switch. 

 

183

Содержание xStack DES-3800 Series









































































































































































































































































































































































Отзывы:

Нет отзывов