xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
TFTP Services
Trivial File Transfer Protocol (TFTP) services
allow the Switch's firmware to be upgraded by
transferring a new firmware file from a TFTP
server to the Switch. A configuration file can also
be loaded into the Switch from a TFTP server.
Switch settings can be saved to the TFTP server,
and a history log can be uploaded from the Switch
to the TFTP server. The TFTP server must be
running TFTP server software to perform the file
transfer.
Figure 6- 18. TFTP Services window
TFTP server software is a part of many network management software packages – such as NetSight, or can be obtained as a
separate program
.
To update the Switch's firmware or configuration file, open the
TFTP Services
hyperlink, located in the
Administration
folder.
The following parameters can be configured:
Parameter Description
Active
Select a service for the TFTP server to perform from the drop down window:
•
•
•
•
Download Firmware
- Enter the IP address of the TFTP server and specify the location
of the new firmware on the TFTP server. Click
Start
to record the IP address of the TFTP
server and to initiate the file transfer.
Download Configuration
- Enter the IP address of the TFTP server, and the path and
filename for the Configuration file on the TFTP server. Click
Start
to record the IP
address of the TFTP server and to initiate the file transfer.
Upload Configuration
- Enter the IP address of the TFTP server and the path and
filename for the switch settings on the TFTP server. Click
Start
to record the IP address
of the TFTP server and to initiate the file transfer.
Upload Log
- Enter the IP address of the TFTP server and the path and filename for the
history log on the TFTP server. Click
Start
to record the IP address of the TFTP server
and to initiate the file transfer.
Image ID
Select the
Image ID
of the firmware. The Switch can hold two firmware images in its memory.
Image ID 1 will always be the boot up firmware for the Switch unless specified by the user.
Choosing
Active
will download the firmware to the Boot Up Image ID, depending on the user’s
configuration. Information on configuring Image IDs can be found in this section, under the
heading
Multiple Image
Services
.
Configuration ID
Select the
Configuration ID
for uploading or downloading configuration files from or to the
Switch. Like the Image ID, the Switch can hold two configuration files in its memory. Choosing
Active
will download the configuration to the Boot Up Configuration ID, depending on the user’s
configuration.
Server IP
Address
Enter the IP address of the server from which to download firmware or configuration files.
File Name
Enter the path and filename of the firmware or configuration file to upload or download.
50
Содержание xStack DES-3800 Series
Страница 50: ...xStack DES 3800 Series Layer 3 Stackable Fast Ethernet Managed Switch 35 ...
Страница 340: ......
Страница 357: ......
Страница 360: ......