D-Link VoiceCenter DVX-2000MS страница 161 Скачать руководство пользователя | Manualshive

Страница: 161 / 162

background image

11

D-Link DVX-000MS User Manual

Appendix E - Warranty

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

If this device is going to be operated in 5.15 ~ 5.25GHz frequency range, then it is restricted in indoor environment only.

IMPORTANT NOTICE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at
the factory to match the intended destination. The firmware setting is not accessible by the end user.

For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local
D-Link office.

This class B digital apparatus complies with Canada ICE-003

«
...
159
160
161
162
»

Содержание VoiceCenter DVX-2000MS



































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VoiceCenter DVX-2000MS

Бренд: Samsung Страницы: 68

Бренд: Samsung Страницы: 89

Бренд: Samsung Страницы: 72

Бренд: Samsung Страницы: 59

Бренд: Samsung Страницы: 42

Бренд: Samsung Страницы: 15

Бренд: Yealink Страницы: 4

CP930W Telesystem

Бренд: Yealink Страницы: 12

Бренд: Yamaha Страницы: 23

Бренд: Uniden Страницы: 36

Video 2000 Series

Бренд: VTQ Videotronik Страницы: 5

Бренд: Sagem Страницы: 2

Бренд: Aiwa Страницы: 76

Бренд: Roadstar Страницы: 80

Бренд: Rockville Страницы: 10

Syn-Apps VIP-801A-SA

Бренд: Valcom Страницы: 2

Touch Screen Caller ID Phone

Бренд: ENZER Страницы: 5

Бренд: Pyle Pro Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды