D-Link SmartPro DGS-1500-20 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 113

background image

5 Configuration

D-Link Web Smart Switch User Manual

74

Figure 5.100 – ACL > ACL Wizard

From: Specify the origin of accessible packets. The possible values are:

Any - Indicates ACL action will be on packets from any source.

MAC Address - Indicates ACL action will be on packets from this MAC address. If you want to enter
a Wildcard for all MACs (00-00-00-00-00-00), you need to leave the field blank.

IPv4 Address - Indicates ACL action will be on packets from this IPv4 source address.

IPv6 Address - Indicates ACL action will be on packets from this IPv6 source address.

To: Specify the destination of accessible packets. The possible values are:

Any - Indicates ACL action will be on packets from any source.

MAC Address - Indicates ACL action will be on packets from this MAC address. The field of format
is xx-xx-xx-xx-xx-xx. If you want to enter a Wildcard for all MACs (00-00-00-00-00-00), you need to
leave the field blank.

IPv4 Address - Indicates ACL action will be on packets from this IPv4 source address.

IPv6 Address - Indicates ACL action will be on packets from this IPv6 source address.

Service Type: Specify the type of service. The possible values are:

Any - Indicates ACL action will be on packets from any service type.

Ether type - Specifies an Ethernet type for filtering packets.

ICMP All - Indicates ACL action will be on packets from ICMP packets.

IGMP - IGMP packets can be filtered by IGMP message type.

TCP All - Indicates ACL action will be on packets from TCP Packets.

TCP Source Port - Matches the packet to the TCP Source Port.

TCP Destination Port - Matches the packet to the TCP Destination Port.

UDP All - Indicates ACL action will be on packets from UDP Packets.

UDP Source Port - Matches the packet to the UDP Source Port.

UDP Destination Port - Matches the packet to the UDP Destination Port.

Action: Specify the ACL forwarding action matching the rule criteria. Permit forwards packets if all other ACL
criteria are met. Deny drops packets if all other ACL criteria is met.

Ports: Enter a range of ports to be configured.

Press Apply for the settings to take effect.

NOTE: Once the ACL rules conflict, rules with the
smaller rule ID will take higher priority.

NOTE: Be careful when configuring ACL rules, an
inappropriate ACL rule may cause management
access failure.

«
...
77
78
79
80
81
...
»

Содержание SmartPro DGS-1500-20


















































































































Отзывы:

Нет отзывов

Похожие инструкции для SmartPro DGS-1500-20

Бренд: Cables to Go Страницы: 4

MMAC-Plus 9G426-02

Бренд: Cabletron Systems Страницы: 12

MMAC-Plus 9F310-02

Бренд: Cabletron Systems Страницы: 4

Бренд: Cabletron Systems Страницы: 16

Бренд: cable matters Страницы: 4

Бренд: CableCreation Страницы: 7

Бренд: 3Com Страницы: 12

S7906E - Switch

Бренд: 3Com Страницы: 8

Бренд: DITEC Страницы: 8

Бренд: Mellanox Technologies Страницы: 12

Бренд: DAB Страницы: 56

Бренд: Digitronic Страницы: 24

Бренд: Elements Страницы: 2

Бренд: Kobold Страницы: 23

Бренд: CYP Страницы: 28

Бренд: ALFAtron Страницы: 15

Бренд: KYLAND Страницы: 34

Бренд: TRENDnet Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды