D-Link Nuclias DNH-100 Скачать руководство пользователя страница 27

Страница: 27 / 79

Nuclias Connect Software User Manual

Nuclias Connect Configuration

Page 27

ASRA

Choose enable if the network has Additional Steps required for

Access.

ESR

Choose enable to indicate that emergency services are reachable

through this device.

USEA

Choose to enable or disable USEA.

Venue Group

Specify group venue belongs to.

Venue Type

Specify type of venue.

Venue Name

Specify name of venue. Choose from the drop down list a language

used in the name.

HESSID

Specify a homogenous extended service set (ESS) ID that can be

used to identify a specific service provider network.

WAN Link Status

Set information about the status of the Access Point’s WAN

connection from the drop-down menu.

WAN Symmetric Link

Specify state of the WAN link is symmetric (upload and download

speeds are the same).

WAN At Capacity

Specify yes if the Access Point or the network is at its max capacity,

or specify no if not.

WAN Metrics DL Speed

(kps)

The downlink speed of the WAN connection set in kbps. If the

downlink speed is not known, set to 0.

WAN Metrics UL Speed

(kps)

The uplink speed of the WAN connection set in kbps. If the uplink

speed is not known set to 0.

Network Auth Type

Choose from drop-down menu the network authentication type

and specify the web-address.

IP Address Type

Availability

Choose from drop-down menu the IP address version and type

that the Hotspot Operator uses and that would be allocated and

available to a mobile device after it authenticates to the network.

Click Delete icon to delete it from the list.

Domain Name

List one or more domain names for the entity operating the AP.

Roaming Consortium

Add service providers or groups of roaming partners whose security

credentials can be used to connect to a network. Click Delete icon

to delete it from the list.

Nai Realm

Specify list of all NAI realms available through the BSS. Click subtract

icon to delete it from the list.

EAP Method

Specify one or more EAP methods and its authentication ID and

Parameter type. Click Delete icon to delete it from the list.

RFC 4282

Click on drop-down menue to enable or disable RFC 4282.

3gpp Cellular Network

Specify a list of the 3GPP cellular networks available through the AP.

Spcify the MCC and MNC, then click Add icon. Click Delete icon to

delete it from the list.

Connection Capability

Specify a list of common IP protocols (TCP, UDP, IPsec) and ports

(21, 80, 443, 5060), specify its port number and the status of the IP

protocol and click Add. Click Delete icon to delete it from the list.

Operator Friendly Name

Identifies the Hotspot venue operator and choose its language.

OSU SSID

Specify OSU SSID name.

OSU Server URI

Specify OSU Server URI

OSU Method

Specify a list of OSU methods by choosing its language and then

specifying a method by clicking Add. Click Delete icon to delete it

from the list.

OSU Config

Choose from drop-down menu the OSU Configu.

OSU Language Code

Choose a language from the drop-down menu.

Содержание Nuclias DNH-100
















































































Результаты поиска

Содержание Nuclias DNH-100

Отзывы:

Похожие инструкции для Nuclias DNH-100

Бренды по названию

Популярные бренды

D-Link Nuclias DNH-100, Руководство пользователя

Результаты поиска

Содержание Nuclias DNH-100

Отзывы:

Похожие инструкции для Nuclias DNH-100

Бренды по названию

Популярные бренды