Nuclias Connect Software User Manual
Nuclias Connect Configuration
Page 23
The SSID page displays the configurable parameters of a network’s wireless settings. Navigate to
Configuration > Profile
Settings > [Site] > [Network] > SSID
to view existing settings.
In the
Security
section, the following parameters can be configured:
Block
Description
Band
Click the drop-down menu to select wireless frequency band.
Index
Click the drop-down menu to select SSID index (Parameters: Primary,
SSID 1 to SSID 7). To create a new SSID, select the index parameter
first.
SSID
Enter the wireless network name. The SSID must be the same across
all frequencies. In addition, make sure the network name (SSID) on
the selected access point is the same as the defined network name
(SSID) on the Nuclias Connect. For further information, see the access
point Basic > Wireless settings and Advanced Settings > DHCP Server
> Dynamic Pool Settings, to ensure the Domain Name field reflects
the defined network name (SSID) on the Nuclias Connect.
Character Set
Click the drop-down menu to select the character set to be used in
the SSID encoding: UTF-8 or GB2312.
SSID Broadcast
Click the drop-down menu to enable or disable the wireless SSID
visibility.
WMM (Wi-Fi
Multimedia)
Click the drop-down menu to enable or disable the Wi-Fi multimedia.
Security
Click the drop-down menu to select the wireless security protocol:
Open System (no pre-shared key required), WPA-Personal, WPA
Enterprise (Radius server required), WPA2-Personal, WPA2-Enterprise
(Radius server required), WPA-Auto-Personal, WPA-Auto-Enterprise
(Radius server required).
Fast Roaming
Click the drop-down menu to enable or disable fast roaming. This
function is only available for compatible models and specific
software version.
Encryption
Click the drop-down menu to enable or disable WEP Open System
encryption. The function is only available when
Security
is set as
Open System
.
Key Size
Click the drop-down menu to select the WEP key size.
Key Type
Click the drop-down menu to select the WEP key type.
Key Index
Click the drop-down menu to select the WEP key index.
Key Value
Enter the open system WEP encryption key.
Encryption Type
Click the drop-down menu to select the encryption type: Auto, AES,
or TKIP.
Group Key Update
Interval
Enter the WPA group key update interval value.
Passphrase
Enter the secret pass phrase used. The function is only available
when
Security
is
WPA-Personal
,
WPA2-Personal
or
WPA-Auto-
Personal
.
RADIUS Server
Enter the RADIUS server’s IP address. The function is only available
when
Security
is
WPA-Enterprise
,
WPA2-Enterprise
or
WPA-Auto-
Enterprise
.
Configuration
Profile Settings
SSID
Nuclias
Once the settings are updated, the configuration must be uploaded to the access points. See “Profile Settings” on page 22 for
further information.
