D-Link DXS-3600 Series страница 14 Скачать руководство пользователя

Страница: 14 / 55

DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide

Installation

Installation Guidelines

Installing the Switch without a Rack

Installing the Switch into a Rack

Installing Transceivers into the Transceiver Ports

Installing Power Modules into the Power Module Ports

Installing Fan Modules into the Fan Module Ports

Installation Guidelines

This section will discuss the hardware installation guidelines that the user must follow in order to properly and safely

install this switch into the appropriate environment.



Visually inspect the power cord and see that it is fully secured to both the power connector, on the switch, and

the electrical outlet, that supplies power.



Install the switch in a fairly cool and dry place within the acceptable temperature and humidity operating

ranges.



Install the switch in a site free from strong electromagnetic field generators such as motors, vibration, dust,

and direct exposure to sunlight.

Installing the Switch without a Rack

This section is used to guide the user through installing the switch in an area other than a switch rack. Attach the

rubber feet included to the bottom of the switch. Take note that there should be marked blocks on the bottom of the

switch to indicate where to attach the rubber feet. These marking are usually found at each bottom corner of the

device. The rubber feet cushion the switch, protecting the casing from scratches and preventing it from scratching

other surfaces.

Figure 2-1 Prepare the Switch for installation on a desktop or shelf

Install the switch on a sturdy, level surface that can support the weight of the switch (see the Appendix section for the

Weight

specifications of this switch). Do not place any heavy objects on the switch. The power outlet should be within

1.82 meters (6 feet) of the switch. Make sure that there is proper heat dissipation from and adequate ventilation

around the switch. Leave at least 10 cm (4 inches) of space at the front and rear of the switch for ventilation.

Содержание DXS-3600 Series
























































Результаты поиска

Содержание DXS-3600 Series

Отзывы:

Похожие инструкции для DXS-3600 Series

Бренды по названию

Популярные бренды

D-Link DXS-3600 Series, Руководство по установке оборудования

Результаты поиска

Содержание DXS-3600 Series

Отзывы:

Похожие инструкции для DXS-3600 Series

Бренды по названию

Популярные бренды