41
D-Link DWR-953 User Manual
Section 3 - Configuration
Outbound Filter
Check this box to enable the filter.
You may select
Always On
or choose the number of a schedule
rule that you have defined. Click
Copy to
to copy the rule to the
specified ID.
Select whether to
Allow
or
Deny
all data to pass except those
matching the rules configured on this page.
Identifies the filter.
Specify the local IP address and then specify the port after the
colon.
Specify the remote IP address and then the port after the colon.
Select this box to enable the filter.
Specify the schedule rule number or click
Add New Rule...
to add
a new schedule rule.
Outbound Filter:
Use schedule
rule:
Outbound Filter
rules list:
ID:
Source IP : Ports:
Destination IP :
Ports:
Enable:
Schedule Rule #:
The
Outbound Filter
enables you to control what packets are allowed to pass through the router. The outbound filter applies to all outbound
packets.
