12
D-Link DWR-953 User Manual
Section 3 - Configuration
PPPoE
Enter the PPPoE username provided by your ISP.
Enter the PPPoE password provided by your ISP.
Re-enter the PPPoE password for verification.
Enter the PPPoE service name provided by your ISP if applicable.
Enter the IP address provided by your ISP here.
Enter the primary DNS server provided by your ISP here.
Enter the secondary DNS server provided by your ISP here.
Enter the MAC address, or click
Clone
to clone your client’s MAC
address to the WAN port.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity (if you select
Auto-reconnect
below, this setting will have no effect).
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your ISP. The default value is 0.
Check the box to allow the router to automatically attempt to
reconnect whenever the Internet connection is lost.
Click the checkbox to disable Network Address Translation(NAT).
Username:
Password:
Verify Password:
Service Name:
IP Address:
Primary DNS
Server:
Secondary DNS
Server:
MAC Address:
Maximum Idle
Time:
MTU:
Auto-reconnect:
NAT disable:
