13
D-Link DWR-953 User Manual
Section 3 - Configuration
PPTP
If your ISP provided a static IP address, select
Static IP
, otherwise
leave this setting at the default,
Dynamic IP
.
Enter the IP address provided by your ISP (Static IP only).
Enter the subnet mask provided by your ISP (Static IP only).
Enter the gateway address provided by your ISP (Static IP only).
Enter the server IP address provided by your ISP (Static IP only).
Enter the PPTP username provided by your ISP.
Enter the PPTP password provided by your ISP.
Re-enter the PPTP password for verification.
Select
Always on
if you would like the router to never disconnect,
or
Connect-on-demand
to allow the router to establish a
connection to the Internet only when a device on your network
tries to access a resource on the Internet.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity (if you selected
Always on
above,
this setting will have no effect).
Click the checkbox to disable Network Address Translation(NAT).
Address Mode:
PPTP IP Address:
PPTP Subnet
Mask:
PPTP Gateway IP
Address:
PPTP Server IP
Address:
Username:
Password:
Verify Password:
Reconnect
Mode:
Maximum Idle
Time:
NAT disable:
