32
D-Link DWR-953 User Manual
Section 3 - Configuration
Check the box to enable the DHCP server on your router.
Enter the range of IPs for the DHCP server to use to assign IP
addresses to devices on your network.
Enter the lease time for DHCP assignments. The default is 86400.
Enter the IP address of the DHCP server (the default is the router’s
IP address).
Enter the IP address of a secondary DNS server, if applicable.
Enable DHCP
Server:
DHCP IP Address
Range:
DHCP Lease
Time:
Primary DNS IP
Address:
Secondary DNS
IP Address:
DHCP
On this page you can configure the Dynamic Host Configuration Protocol (DHCP) settings.
To permanently set the IP address of devices connected to the DWR-953,
click on the
Fixed Mapping
button.
DHCP Clients:
MAC Address:
IP Address:
Select from the drop down list of clients connected to your
network, choose an ID number and press the
Copy to
button to
assign an ID number.
The MAC address of the device connected to your network.
The IP address you wish to assign to the connected device.
