94
D-Link DWR-112 User Manual
Section 4 - Wireless Security
Configure WPA-Enterprise (RADIUS)
It is recommended that you enable encryption on your wireless router first, before enabling it on your wireless network
adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when
enabling encryption due to the added overhead.
1.
Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on
SETUP
in the top bar and then click
WIRELESS SETTINGS
in
the left-hand bar – then click the
Manual Wireless Connection
Setup
button.
2. Select
Enable WPA/WPA2 Wireless Security (enhanced)
from
the
Security Mode
drop-down menu.
3. Select
Auto(TKIP/AES)
,
TKIP
, or
AES
from the
Cipher Type
drop-down menu. If you have wireless clients that use both types,
use
TKIP/AES
.
4. Select
EAP
from the
PSK / EAP
drop-down menu.
5. Enter the IP Address of your RADIUS server in the
RADIUS Server IP Address
field.
6. Enter the port you are using with your RADIUS server in the
Port
field.
7. Enter the security key in the
Shared Secret
field.
8. Click
Save Settings
to save your settings. If you are configuring the router with a wireless adapter, you will lose
connectivity until you enable WPA-Enterprise (RADIUS) on your adapter and enter the same pass phrase as you
did on the router.