74
D-Link DWR-112 User Manual
Section 3 - Configuration
Time Settings
Select the Time Zone from the drop-down menu.
Check the box to enable Daylight Saving time.
Click this button to set the device’s time the
same to local PC.
Check the box to enable the device to
automatically synchronize with a D-Link NTP
Server. NTP stands for Network Time Protocol.
NTP synchronizes computer clock times in a
network of computers. This will only connect
to a server on the Internet, not a local server.
Select one of the D-Link NTP Servers from
the drop-down menu. The DWR-112 will then
synchronize it’s clock to be the same time as
the D-Link Internet time server. Click the
Update
Now
button to synchronize with the D-Link
Internet time server immediately.
To manually input the time, use the drop-down
menus to enter the values in these fields for the
Year, Month, Day, Hour, Minute, and Second.
Time Zone:
Enable Daylight
Saving:
Sync your
Computer’s
Time Settings:
Automatic
Time and Date
Configuration:
NTP Server
Used:
Set the Time
and Date
Manually:
To access this page, click on TOOLS in the top bar, then click TIME in the left-hand bar. The Time Configuration option
allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can
set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically
adjust the time when needed.
Click the
Save Settings
button to save any changes.