66
D-Link DWR-112 User Manual
Section 3 - Configuration
Firewall Rules
Enter a name for the firewall rule.
Use the drop-down menu to specify if the router
should
Allow
or
Deny
traffic matching the
firewall rule.
Use the drop-down menus to select the
Source
and
Destination
interfaces for the Firewall Rule
Use the
IP Address
fields next to each
Interface
drop-down menu to specify the IP
address ranges for the Source/Destination
interfaces.
The first host in the IP address range should
be entered in the top field and the last host in
the IP address range should be entered in the
field beneath for both the Source/Destination
intefaces.
Use the drop-down menu to select the protocol
that will be used for the firewall rule (TCP, UDP,
ICMP, or ALL).
Enter the range of ports that the firewall rule
will apply to.
The first port in the port range should be entered
in the top field and the last host in the port range
should be entered in the field beneath.
Name:
Action:
Interface:
Protocol:
Port
Range:
To create a firewall rule, configure the parameters as described below: