D-Link DSN-2100-10 - xStack Storage Area Network Array Hard..., Руководство пользователя

Страница: 71 / 166

xStack Storage User’s Guide 71
5.4.3.2 Modifying LAG Parameters
There may be times when you need to modify LAG parameters. Using the management console,
you can view the Maximum Transmission Unit (MTU) size and requested speed. As you modify LAG
parameters, record the information in Appendix B.
1. In the Logical Resources tab, click the LAG whose parameters you want to change.
2. Perform one of the following steps:
–
On the Network menu, click Modify LAG Parameters .
–
Right-click and click Modify LAG Parameters .
Either step displays the Modify LAG Parameters screen (see Figure 5-23).
Figure 5-23 Modify Lag Parameters Dialog Box
3. Complete the fields in the screen (see Table 5-9).
4. Click OK .
Table 5-9 Modify LAG Parameters Screen Settings
Setting Description
MTU Size This value specifies the maximum size of a packet that can be transferred in one frame
over a network.
Requested Speed This value indicates the requested speed for transmitting and sending packets. For the
DSN-2100, the choices are Auto Detect, 100 Mbps, and 10 Mbps. For the DSN-3400,
the only choice is 10GB.