D-Link DSN-2100-10 - xStack Storage Area Network Array Hard... Скачать руководство пользователя страница 164 | Manualshive

Страница: 164 / 166

background image

164

Appendix G Acronyms and Abbreviations

LAG

Link Aggregation Group. The combining of physical network links into a single logical
link for increased bandwidth. A LAG increases capacity and availability of the
communications channel between devices using existing Fast Ethernet and Gigabit
Ethernet technology. LAGs also provide load balancing, where processing and
communications activity is distributed across several links in a trunk, so that no
single link is overwhelmed.

LAN

Local Area Network. A computer network that spans a relatively small area. Most
LANs are confined to a single building or group of buildings. Most LANs connect
workstations and personal computers. Each node (individual computer) in a LAN has
its own CPU with that executes programs, but it can also access data and devices
anywhere on the LAN. This means that many users can share expensive devices, such
as laser printers, as well as data. Users can also use the LAN to communicate with
each other, by sending e-mail or engaging in chat sessions. There are many different
types of LANs. Ethernet is the most common LAN for PCs.

LB

Logical Block. A block of storage stored (and read) by the system.

LUN

Logical Unit Number. According to the SCSI Architectural Model, the number used by
an iSCSI initiator to access a target’s Logical Unit. In the xStack Storage, a logical
unit is a volume.

MAC Address

Media Access Control address. A hardware address that uniquely identifies each node
of a network.

Member

A group of chunks organized vertically in an array.

Mirror

A method for improving reliability of a Volume by providing data redundancy. In a
mirror volume, data redundancy is provided by recoding every data block on more
than one drive.

MPU

Management Processor Unit. The PowerPC CPU used for management processing on
the xStack Storage.

Node

A computer or other device, such as a printer. Every node has a unique network
address, sometimes called a Data Link Control (DLC) address or Media Access Control
(MAC) address.

Parity

A way to improve reliability of a volume by providing data redundancy. In a parity
volume, data redundancy is improved by recording data blocks across multiple drives
and recording one additional parity block on an additional drive. If any single drive
fails, the original data can be reconstructed from the remaining blocks.

PLBN

Physical Logical Block Number. The number of an LB on a drive.

RFC

Request for Comments. A series of notes about the Internet started in 1969. An
Internet Document can be submitted to the IETF by anyone, but the IETF decides if
the document becomes an RFC. If the RFC gains enough interest, it may evolve into
an Internet standard. Each RFC is designated by an RFC number. Once an RFC is
published, it never changes. Modifications to an original RFC are assigned a new RFC
number.

«
...
162
163
164
165
166
»

Содержание DSN-2100-10 - xStack Storage Area Network Array Hard...







































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DSN-2100-10 - xStack Storage Area Network Array Hard...

Бренд: LENCO Страницы: 27

Бренд: Audiocenter Страницы: 40

Бренд: Sonos Страницы: 15

Бренд: Danley Страницы: 8

Бренд: Sharp Страницы: 20

Бренд: Silvercrest Страницы: 23

Бренд: Silvercrest Страницы: 46

Бренд: Teac Страницы: 32

Бренд: Aiwa Страницы: 22

Бренд: Aiwa Страницы: 121

Бренд: Marashall Страницы: 13

Бренд: Aiwa Страницы: 40

Бренд: NAIM Страницы: 12

Бренд: Hyundai Страницы: 68

MC .. 100 .. Series

Бренд: Albrecht Страницы: 8

Бренд: uher Страницы: 25

Бренд: Daewoo Страницы: 24

Бренд: Califone Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды