D-Link DNR-326 Скачать руководство пользователя страница 79

Страница: 79 / 86

D-Link DNR-326 User Manual

Section 4 - Troubleshooting

Troubleshooting

Check Disk Status LEDs to verify condition of the NVR

The disk status LEDs report the condition of the disk drives:

These lights will be solid BLUE when drives are connected but inactive.

The lights will blink when the drives are being accessed, formatted or synchronized.

They will illuminate AMBER if a drive has failed.

Replace a Failed Disk Drive

If a disk drive fails, the Disk Status LED will turn amber. If the disk drive belongs to a RAID Volume, the Volume will go Critical

or Offline.

Replace the failed disk drive with a new disk drive of the same or slightly greater capacity. Please make sure you have powered

down the unit.

Step 1: Open the unit’s front cover.

Step 2: Pull out the failed disk drive.

Step 3: Install a new disk drive into the slot.

If the failed drive belonged to a RAID Volume, the RAID Volume will begin rebuilding as soon as the new drive is installed.

During the rebuild, the Disk Status LED will blink. If the replacement drive is free, i.e. not assigned to a RAID Volume or as a

spare, the Disk Status LED remains dark after you install the new drive.

Respond to a Critical RAID Volume

How the unit responds to a critical RAID Volume depends on the RAID level of your Volume and whether you have a spare

drive available:

For

RAID 1

Volumes, if a spare drive is available, the RAID Volume will begin rebuilding itself automatically.

For

RAID 1

Volumes, when no spare drive is available, you must replace the failed disk drive. The RAID Volume will begin rebuilding itself when you install the new disk drive.

For

RAID 0

Volumes go offline after a disk drive failure. A

RAID 0

volume cannot be rebuilt. All data on the volume will be lost.

Содержание DNR-326























































































Результаты поиска

Содержание DNR-326

Отзывы:

Похожие инструкции для DNR-326

Бренды по названию

Популярные бренды

D-Link DNR-326, Руководство пользователя

Результаты поиска

Содержание DNR-326

Отзывы:

Похожие инструкции для DNR-326

Бренды по названию

Популярные бренды