D-Link DMS-1100-10TS Скачать руководство пользователя страница 70

Страница: 70 / 116

D-Link DMS-1100 Series User Manual

Click

Edit Instance

button to modify the ERP instance, click

Show Status

button to display the ERPS

physical ring

’s status information, or click

Delete

button to remove the Ethernet instance.

Click

Edit Instance

to modify the Ethernet Instance configuration:

Figure 4.80 – L2 Features > ERPS(G.8032) > ERPS – Edit Instance

The fields that can be configured for edit

ERPS

are described below:

Item

Description

Ethernet Ring Name

Enter the Ethernet ring name for the specified instance.

Sub Ring Name

Enter the sub ring name of a physical ring.

Port0

Specifies the port as the first ring port and also specifies the virtual port
channel used.

Port1

Specifies the port as the second ring port and also specifies the virtual
port channel used.

Description

Enter the description for the specified instance.

R-APS Channel VLAN (1-4094)

Specifies the R-APS channel of ERP instance. The range is between 1
and 4094.

Inclusion VLAN List

Specifies to add or delete the inclusion VLAN group. The VLANs
specified here will be protected by the ERP mechanism.

MEL(0-7)

Specifies the ring MEL of the R-APS function. The default ring MEL is
1.

Profile Name

Specifies the profile name of Ethernet Instance.

RPL Port

Specifies the RPL port used. Options to choose from are Port0, Port1,
and None.

RPL Owner

Specifies to enable or disable the RPL owner node.

Active

Specifies enable or disable to active this ERP instance.

Table 4.52

Click

Apply

to make the configurations take effect.

Click the

Back

button to return to the previous page.

Содержание DMS-1100-10TS





















































































































Результаты поиска

Содержание DMS-1100-10TS

Отзывы:

D-Link DMS-1100-10TS, Руководство пользователя, Страница: 70 / 116

Результаты поиска

Содержание DMS-1100-10TS

Отзывы: