D-Link DMS-1100-10TS Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 116

background image

D-Link DMS-1100 Series User Manual

40

SNMP Global Settings

SNMP Global State

Specify to enable or disable the SNMP feature. The default setting is

Disabled

.

SNMP Response Broadcast
Request

Select to enable or disable the server to response to broadcast SNMP
GetRequest packets.

SNMP UDP Port (0-65535)

Enter the SNMP UDP port number. The value is between 0 and 65535.

Trap Source Interface

Specify the interface whose IP address will be used as the source
address for sending the SNMP trap packet.

Trap Settings

Trap Global State

Enable or disable SNMP trap notifications from client devices.
Disabling this option means no trap signals will be sent. When enabling
this option, you may choose the type of SNMP traps to enable.

SNMP Authentication Trap

Tick  this  option  to  control  the  sending  of  SNMP  authentication  failure
notifications.  An  authentication  Failure  trap  is  generated  when  the
device receives an SNMP message that is not properly authenticated.
The  authentication  method  depends  on  the  version  of  SNMP  being
used.  For  SNMPv1  or  SNMPv2c,  authentication  failure  occurs  if
packets  are  formed  with  an  incorrect  community  string.  For  SNMPv3,
authentication  failure  occurs  if  packets  are  formed  with  an  incorrect
SHA/MD5 authentication key.

Port Link Up

Check this feature to enable Link Up traps. Whenever a device
changes status from ‘link down’ to ‘link up’, it will send a Link Up trap to
the management station.

Port Link Down

Check this feature to enable Link Down traps. Whenever a device
changes status from ‘link up’ to ‘link down’, it will send a Link Down
trap to the management station.

STP Port Status Change

Check this feature to enable STP Port Status Change traps. Whenever
a device changes status from STP Port Status, it will send a STP Port
Status Change trap to the management station.

LBV Detection

Check this feature to enable LBV Detection traps. Whenever a device
does detect LBV, it will send a LBV Detection trap to the management
station.

Firmware Upgrade

Check this feature to enable Firmware Upgrade traps. Whenever a
device does do firmware upgrade, it will send a Firmware Upgrade trap
to the management station.

Table 4.25

Click

Apply

to make the configurations take effect.

Management > SNMP > SNMP View Table Settings

The SNMP View page allows user to define SNMP Views, which can be used to manage the MIB objects
that are accessible to a remote SNMP manager.

«
...
44
45
46
47
48
...
»

Содержание DMS-1100-10TS





















































































































Отзывы:

Нет отзывов

Похожие инструкции для DMS-1100-10TS

Бренд: ADTRAN Страницы: 2

Бренд: XAVI Technologies Corp. Страницы: 71

Бренд: Fortinet Страницы: 20

PowerBeam AC Gen2

Бренд: Ubiquiti Страницы: 22

ADSL/ADSL2/ADSL2+ Router 660R-6xC Series

Бренд: ZyXEL Communications Страницы: 282

Бренд: NETGEAR Страницы: 2

Бренд: axing Страницы: 4

AirStation WZR-1166DHP

Бренд: Buffalo Страницы: 2

Sinus 154 data II

Бренд: T-COM Страницы: 12

BROADCAST POLLING FRAD BPF-14 BU

Бренд: DCB Страницы: 28

8-Port 10/100Mbps Fast Ethernet Switch

Бренд: Amer.com Страницы: 14

Бренд: Thecus Страницы: 130

ACC-BKT-AX-BEAM

Бренд: Extreme Networks Страницы: 35

Бренд: Comtrend Corporation Страницы: 208

Бренд: Dynamix Страницы: 87

Бренд: TRENDnet Страницы: 2

Safeguard for Privileged Sessions 3000

Бренд: One Identity Страницы: 37

Бренд: N-Tron Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды