D-Link DMS-1100-10TS Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 116

D-Link DMS-1100-10TS Скачать руководство пользователя страница 37

D-Link DMS-1100 Series User Manual

31

Click

Apply

to make the configurations take effect.

System > PoE > PoE System (DMS-1100-10TP only)

DMS-1100-10TP supports Power over Ethernet (PoE) as defined by the IEEE specification. It supplies power
to PD device up to 30W for port 1~8, meeting IEEE802.3af standards and pre-802.3at standards.

DMS-1100-10TP works with all D-Link 802.3af or 802.3at capable devices. The Switch is highly compatible
with all IEEE 802.3at/af compliant equipment, and transform the PoE to provide power to D-Link wireless
APs, IP Cams, IP phones. And also works with DPE-301GS PoE splitter providing 30W power to legacy PD
devices.

IEEE 802.3af defined that the PSE provides power according to the following classification:

Class

Usage

Minimum Power Levels

Output at the PSE

Maximum Power Levels at

the Powered Device

0

Default

15.4W

0.44 to 12.95W

1

Optional

4.0W

0.44 to 3.84W

2

Optional

7.0W

3.84 to 6.49W

3

Optional

15.4W

6.49 to 12.95W

4

Optional

Treat as Class 0

Reserved for future use

IEEE 802.3at defined that the PSE provides power according to the following classification:

Class

Usage

Powered Device

Classification

Guaranteed output

power by PSE Output

Maximum Power Levels

at the Powered Device

0

Default

Default, Type 1

15.4W

0.44 to 12.95W

1

Optional

Type 1

4.0W

0.44 to 3.84W

2

Optional

Type 1

7.0W

3.84 to 6.49W

3

Optional

Type 1

15.4W

6.49 to 12.95W

4

Optional

Type 2

30W

12.95 to 25.5W

IEEE 802.3at defined that the PSE provides power according to the following classification: The PoE System
page is used to configure the PoE system for PoE modules.

Figure 4.32 –System > PoE > PoE System

The fields that can be configured for

PoE System

are described below:

Item

Description

Power Budget (W)

Displays the power budget of Watts on the device

«
...
35
36
37
38
39
...
»

Содержание DMS-1100-10TS





















































































































Отзывы:

Нет отзывов