DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
79
Example
This example shows how to statically add a group for IGMP snooping.
Switch# configure terminal
Switch(config)# vlan 1
Switch(config-vlan)# ip igmp snooping static-group 225.1.2.3 interface Ethernet
1/0/1
Switch(config-vlan)#
15-5
show ip igmp snooping
This command is used to display IGMP snooping information on the Switch.
show ip igmp snooping [vlan
VLAN-ID
]
Parameters
vlan
VLAN-ID
(Optional) Specifies the VLAN to be displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display IGMP snooping information for all VLANs where IGMP snooping is enabled.
Example
This example shows how to display IGMP snooping global state.
Switch#show ip igmp snooping
IGMP snooping global state: Enabled
Switch#
This example shows how to display IGMP snooping information on VLAN 2.
Switch#show ip igmp snooping vlan 2
IGMP snooping state : Enabled
Querier state : Enabled (Active)
Fast Leave state : Enabled