DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
48
11-4
r-aps channel-vlan
This command is used to specify the APS channel VLAN for an ERP instance. Use the
no
form of this
command to delete the configuration.
r-aps channel-vlan
VLAN-ID
no r-aps channel-vlan
Parameters
VLAN-ID
Specifies the VLAN ID. The valid values are from 1 to 4094.
Default
None.
Command Mode
ERP Instance Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is used to assign the APS channel VLAN for an ERP instance. The APS channel VLAN needs to
be assigned before an ERP instance can be set to the operation state.
The specified APS channel VLAN does not need to exist to configure the command. But it needs to exist before
the instance can be set to the operation state.
If the APS channel VLAN is removed when the ERP instance is in operation, the ERP instance will enter the
operational disabled state.
Each ERP instances should have distinct APS channel VLAN.
Example
This example shows how to configure the APS channel VLAN “2” for the ERP instance “1”.
Switch# configure terminal
Switch(config)# ethernet ring g8032 campus
Switch(config-erp)# instance 1
Switch(config-erp-instance)# r-aps channel-vlan 2
Switch(config-erp-instance)#
11-5
inclusion-list vlan-ids
This command is used to configure VLAN IDs protected by the ERP mechanism. Use the
no
form of this
command to delete the VLAN IDs.
inclusion-list vlan-ids
VLAN-ID
[, | -]
no inclusion-list vlan-ids
VLAN-ID
[, | -]
Parameters