22
D-Link DIR-820L User Manual
Select
Dynamic IP (DHCP)
to obtain IP Address information
automatically from your ISP. Select this option if your ISP does not
give you any IP numbers to use. This option is commonly used for
cable modem services.
The Host Name is optional but may be required by some ISPs. Leave
blank if you are not sure.
Check the box if you are having problems obtaining an IP address
from your ISP.
Enter the Primary and Secondary DNS server IP addresses assigned by
your ISP. These addresses are usually obtained automatically from your
ISP. Leave blank if you did not specifically receive these from your ISP.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port’s physical interface
MAC address on the Broadband Router. It is not recommended that
you change the default MAC address unless required by your ISP.
You can use the
Copy Your PC’s MAC Address
button to replace the Internet port’s MAC address with the MAC address of your
Ethernet card.
My Internet
Connection:
Host Name:
MAC Address:
Internet Setup
Dynamic (Cable)
Primary/Secondary
DNS Server:
MTU:
Use Unicasting:
Содержание DIR-820L
Страница 1: ...User Manual Version 1 0 June 20 2013 DIR 820L Wireless AC1000 Dual Band Cloud Router ...
Страница 112: ...107 D Link DIR 820L User Manual IPV6 Routing This page displays the IPV6 Routing details configured for your router ...
Страница 113: ...108 D Link DIR 820L User Manual Support ...