57
D-Link DIR-820L User Manual
Static IPv6 Address Connection
This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your
IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS
Server. Your ISP provides you with all this information.
Use Link-Local
Address:
IPv6 Address:
Subnet Prefix
Length:
Default Gateway:
Primary IPv6 DNS
Address:
Secondary IPv6
DNS Address:
LAN IPv6 Address:
The
Link-Local Address
is used by nodes and routers when
communicating with neighboring nodes on the same link.
When this box is checked, it enables IPv6-capable devices to
communicate with each other on the LAN side.
Enter the WAN
IPv6 Address
for the router here.
Enter the WAN
Subnet Prefix Length
value used here.
Enter the WAN
Default Gateway
IPv6 address used here.
Enter the WAN primary
DNS Server
address used here.
Enter the WAN secondary
DNS Server
address used here.
These are the settings of the LAN (Local Area Network) IPv6
interface for the router. The router’s
LAN IPv6 Address
configuration is based on the IPv6 Address and Subnet
assigned by your ISP. (A subnet with prefix /64 is supported
in LAN.)
Содержание DIR-820L
Страница 1: ...User Manual Version 1 0 June 20 2013 DIR 820L Wireless AC1000 Dual Band Cloud Router ...
Страница 112: ...107 D Link DIR 820L User Manual IPV6 Routing This page displays the IPV6 Routing details configured for your router ...
Страница 113: ...108 D Link DIR 820L User Manual Support ...