D-Link DIR-820L, Руководство пользователя

Страница: 47 / 165

42 D-Link DIR-820L User Manual
WPA/WPA2-Personal (PSK)
It is recommended to enable wireless security on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on
Setup
and then
click
Wireless Settings
on the left side.
2. Next to
Security Mode
, select
WPA-Personal
.
3. Next to
WPA Mode
, select
Auto(WPA or WPA2)
,
WPA2 Only
, or
WPA Only
.
Use Auto if you have wireless clients using both WPA and WPA2.
4. Next to Cipher Type , select TKIP and AES , TKIP , or AES .
5. Next to Group Key Update Interval , enter the amount of time before the
group key used for broadcast and multicast data is changed (3600 seconds
by default).
6. Next to
Pre-Shared Key
, enter a key (passphrase). The key is entered as a
pass-phrase in ASCII format at both ends of the wireless connection. The
pass-phrase must be between 8-63 characters.
7. Click
Save Settings
to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity
until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.